Dears;
In our Corrugator machine, we have 10 Allen Bradley Compact Logic PLCs and Panel View 1000 at 10 different units. Each PLC and PV is connected via an Ethernet Switch and all the switches are then connected with main switch. I have found that the connector of Ethernet cable from PLC/PV to switch is configured as T568-B†pin outs and the connector of Ethernet cable from sub switch to main switch is configured as T568-A†pin outs. Please assist if this is ok or all the connectors should be configured a same pin outs?
In our Corrugator machine, we have 10 Allen Bradley Compact Logic PLCs and Panel View 1000 at 10 different units. Each PLC and PV is connected via an Ethernet Switch and all the switches are then connected with main switch. I have found that the connector of Ethernet cable from PLC/PV to switch is configured as T568-B†pin outs and the connector of Ethernet cable from sub switch to main switch is configured as T568-A†pin outs. Please assist if this is ok or all the connectors should be configured a same pin outs?