DLMUK
Member
Then either the G315 is not set to receive downloads via Ethernet or the Crimson 3.0 software is not set to send that way.
How did you set the IP in the Display? Did you use the power up with 1st and 4th buttons pressed method? If so, it is set correctly. If not, clear the database if there is one by using power up with 1st and 2nd buttons pressed. Then power up with 1st and 4th pressed and set the IP address again.
Once the display shows the correct IP address and says that it is ready for Ethernet download try again.
If you are already at this screen, we can look at your Crimson 3.0 settings.
Held 1st & 4th button to set the IP on the 315. The display shows it is ready.
Then went onto Crimson > Link > Selected TCP/IP
Went onto Network > Ethernet 1 > Enabled > IP address set to 192.168.1.20
Network > Download > "IP Download" set to Enabled.
Thanks