martin1 Member M Join Date Apr 2008 Location Britan Posts 43 Aug 17, 2018 #1 Hi all, Is it possible to read the amps of a motor from a connected TesysU over Modbus 485 using Unity Pro software?
Hi all, Is it possible to read the amps of a motor from a connected TesysU over Modbus 485 using Unity Pro software?
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Aug 17, 2018 #2 https://media.distributordatasolutions.com/GraniteCity/2017q3/a36f91d0727b396a42ab2a99a6b9176d9a729151.pdf 3.2 Configuring TeSys U on the Modbus Network with Unity Pro (for an M340 PLC) The above manual and section should help you out. Regards,
https://media.distributordatasolutions.com/GraniteCity/2017q3/a36f91d0727b396a42ab2a99a6b9176d9a729151.pdf 3.2 Configuring TeSys U on the Modbus Network with Unity Pro (for an M340 PLC) The above manual and section should help you out. Regards,
martin1 Member OP M Join Date Apr 2008 Location Britan Posts 43 Aug 17, 2018 #3 gclshortt said: https://media.distributordatasolutions.com/GraniteCity/2017q3/a36f91d0727b396a42ab2a99a6b9176d9a729151.pdf 3.2 Configuring TeSys U on the Modbus Network with Unity Pro (for an M340 PLC) The above manual and section should help you out. Regards, Click to expand... Cheers for that. I am having issues locating the "Ctrl_cmd_mdb_u_addm" DFB within Unity. It not in my library. I have v12 installed. Any ideas??
gclshortt said: https://media.distributordatasolutions.com/GraniteCity/2017q3/a36f91d0727b396a42ab2a99a6b9176d9a729151.pdf 3.2 Configuring TeSys U on the Modbus Network with Unity Pro (for an M340 PLC) The above manual and section should help you out. Regards, Click to expand... Cheers for that. I am having issues locating the "Ctrl_cmd_mdb_u_addm" DFB within Unity. It not in my library. I have v12 installed. Any ideas??