Good Afternoon ,
I have several new PowerFlex 525 drives. 5 drives out of 17 will start thru my Compactlogix start signal . The rest will not start. I have no Errors or Yellow Triangles . I have the IP Addresses and Subnet's set . I do have a ready ( 1 ) in the PowerFlex 525 Input Tags. Below is the signals that I have coming from the PowerFlex 525.
M30 ( One of the Drives that is starting )
Ready -1
Command Dir -1
Actual Dir -1
CommFreqCnt -1
CommLogicCnt -1
M36 ( One of the Drives NOT running )
Ready -1
Command Dir -1
Actual Dir -1
CommFreqCnt - 0
CommLogicCnt - 0
I pinged the drives , and they returned their IP Addresses.
I did the same procedure when creating them. I did select the ADC feature in the Drive Properties .
Have any of you experienced this .
Thanks so much in advance ,
I have several new PowerFlex 525 drives. 5 drives out of 17 will start thru my Compactlogix start signal . The rest will not start. I have no Errors or Yellow Triangles . I have the IP Addresses and Subnet's set . I do have a ready ( 1 ) in the PowerFlex 525 Input Tags. Below is the signals that I have coming from the PowerFlex 525.
M30 ( One of the Drives that is starting )
Ready -1
Command Dir -1
Actual Dir -1
CommFreqCnt -1
CommLogicCnt -1
M36 ( One of the Drives NOT running )
Ready -1
Command Dir -1
Actual Dir -1
CommFreqCnt - 0
CommLogicCnt - 0
I pinged the drives , and they returned their IP Addresses.
I did the same procedure when creating them. I did select the ADC feature in the Drive Properties .
Have any of you experienced this .
Thanks so much in advance ,