Experts,
I have an issue with an Allen Bradley SLC-500 Output Board.
The PLC is going through it ladder logic correctly and the Output terminal six is lit but i am getting no output from the card on Output 6. See attached, i am getting an Output from Output 9 which is also lit on same Output Card
Is there any repair/fuse i can replace, or does the module need replaced.
Thanks in advance.
SLB
I have an issue with an Allen Bradley SLC-500 Output Board.
The PLC is going through it ladder logic correctly and the Output terminal six is lit but i am getting no output from the card on Output 6. See attached, i am getting an Output from Output 9 which is also lit on same Output Card
Is there any repair/fuse i can replace, or does the module need replaced.
Thanks in advance.
SLB