First project working with BacNet and not having any success.
Trying to read values into a Compact Logix PLC from a Kamstrup 603 Multical unit. I have a Redlion DA30 protocol convertor. I am using the same convertor for Modbus and is working fine.
On a different port, i have setup Bacnet Master to read valves from the Kamstrup. The wiring seems to be correct and i have the red and green flashing lights. The ID on the Kamstrup is set to 27, but when i try to read any values, i don't get any data.
Hoping for some help if anyone has dealt with either unit.
Trying to read values into a Compact Logix PLC from a Kamstrup 603 Multical unit. I have a Redlion DA30 protocol convertor. I am using the same convertor for Modbus and is working fine.
On a different port, i have setup Bacnet Master to read valves from the Kamstrup. The wiring seems to be correct and i have the red and green flashing lights. The ID on the Kamstrup is set to 27, but when i try to read any values, i don't get any data.
Hoping for some help if anyone has dealt with either unit.