Bobobodopalus
Member
Hi all
I'm currently trying to do some communication between 2 cp1l-EM40dt1-d plcs over ethernet/fins,
i have made a routing table and i think downloaded to both PLC's correctly.
port 250 set to network 1
IP addresses are 192.168.250.13 and 192.168.250.14
however i did do this remotely through a VPN so maybe that has caused a problem?
i think the issue is with my RECV function though, it looks as follows:
RECV
D2998
D2998
D2010
MOV
#0001 reading 1 word
D2010
MOV network 1
#01
D2011
MOV node 13 inbuilt ethernet
#13FA
D2012
MOV 2 retries
#0002
D2013
MOV 1 second response?
#0010
D2014
I'm currently trying to do some communication between 2 cp1l-EM40dt1-d plcs over ethernet/fins,
i have made a routing table and i think downloaded to both PLC's correctly.
port 250 set to network 1
IP addresses are 192.168.250.13 and 192.168.250.14
however i did do this remotely through a VPN so maybe that has caused a problem?
i think the issue is with my RECV function though, it looks as follows:
RECV
D2998
D2998
D2010
MOV
#0001 reading 1 word
D2010
MOV network 1
#01
D2011
MOV node 13 inbuilt ethernet
#13FA
D2012
MOV 2 retries
#0002
D2013
MOV 1 second response?
#0010
D2014