Has anyone ever used a flowmeter to start/stop air-compressors?
For example, let's say you have 3 compressors.
Compressor 1, 10 m³/hour
Compressor 2, 7 m³/hour
Compressor 3, 5 m³/hour
If you measure a flow of 9 m³/hour, start compressor 1
Flow of 13 m³, start 1 and 3 and so on, you get the idea.
I like to use a flowmeter but am not sure if it is as simple as this...
For example, let's say you have 3 compressors.
Compressor 1, 10 m³/hour
Compressor 2, 7 m³/hour
Compressor 3, 5 m³/hour
If you measure a flow of 9 m³/hour, start compressor 1
Flow of 13 m³, start 1 and 3 and so on, you get the idea.
I like to use a flowmeter but am not sure if it is as simple as this...