NetNathan
Lifetime Supporting Member
I have a Panelview 1000.
Originally its was communicating to a PLC5.
I replaced the PLC5 with Controllogix. I have converted the PLC logic to Controllogix.
Regrettably, because it is a conversion there is not a link between the Panelview tags and the PLC tags.
Now, I want to connect the Panelview to the Controllogix plc.
Can I just dumb the database from the Panelview and convert the tags in the Panelview from PLC5 format to Controllogix format (example....F138:0 to F138[0]) then reload the database?
Originally its was communicating to a PLC5.
I replaced the PLC5 with Controllogix. I have converted the PLC logic to Controllogix.
Regrettably, because it is a conversion there is not a link between the Panelview tags and the PLC tags.
Now, I want to connect the Panelview to the Controllogix plc.
Can I just dumb the database from the Panelview and convert the tags in the Panelview from PLC5 format to Controllogix format (example....F138:0 to F138[0]) then reload the database?