Struggling_forward
Member
Hi Chaps,
I'm using a Logix 5555 processor as a test bed. 1756-L55/A: series A rev 1.4
I took it out of an old machine. My problem is whenever I try to upload from it my RSLogix5000 V 20.03 I get a fatal error. No error message.
When creating the processor for the new prog I can't get the exact model. altho I've uploaded the EDS from RSLinx.
If I attempt to download the new program I get fatal error.
I dug around and found a copy of the old program but if I try to open it with my RS5000 it fatal errors.
I can still work with all the new PLC's in the manufacturing line. Only this one kills my Rockwell software.
It seems like its an obsolete processor and cannot be config'd in RS5000 V20.3.
I've downloaded all EDS's to do with the L55 and looked for addonprofile but no joy. I've not seen a L55/A ver1.4. I'm about to give up. http://www.plctalk.net/qanda/images/icons/icon9.gif
I'll add pic's of the PLC type and message
PLC
Error
Anyone had this and found a solution?
I'm using a Logix 5555 processor as a test bed. 1756-L55/A: series A rev 1.4
I took it out of an old machine. My problem is whenever I try to upload from it my RSLogix5000 V 20.03 I get a fatal error. No error message.
When creating the processor for the new prog I can't get the exact model. altho I've uploaded the EDS from RSLinx.
If I attempt to download the new program I get fatal error.
I dug around and found a copy of the old program but if I try to open it with my RS5000 it fatal errors.
I can still work with all the new PLC's in the manufacturing line. Only this one kills my Rockwell software.
It seems like its an obsolete processor and cannot be config'd in RS5000 V20.3.
I've downloaded all EDS's to do with the L55 and looked for addonprofile but no joy. I've not seen a L55/A ver1.4. I'm about to give up. http://www.plctalk.net/qanda/images/icons/icon9.gif
I'll add pic's of the PLC type and message
PLC
Error
Anyone had this and found a solution?