Problems with communicacion ascii

Problems with communicacion ascii, ml1400 (1766 L32BXB)

I configured the channel 2 like ascii, 9600 baudios, parity none, stop bit 1 , data bit 1, i used the blocks AWA, AWT,ACB,ACL,ABL in order to send information but i cant see anything in the channel status.

Somebody can help me?
Thanks

http://www.plctalk.net/qanda/showthread.php?t=20065

http://www.plctalk.net/qanda/archive/index.php/t-72719.html

http://www.plctalk.net/qanda/showthread.php?p=711957

The above are a few links to help get you started. Use a program like Hyperterminal to see the ASCII string coming out of the port.
http://accautomation.ca/three-free-plc-programming-software-tools/

Regards,