afoley
Member
I need to convert a pulsing (off,off,off,on,off,off,off,...etc.) signal to a steady on or off input to an allen bradley PLC/5. if the pulse stops,(either on or off) I need to reverse the state of that imput. (If any of you are in the mining industry, think about a slip/sequence switch, without the BWI Eagle.)
I can do this, BUT, when I look at the resulting ladder, and consider that a first year maintenance guy will have to troubleshoot it, I do not want to get called at three in the morning to explain ladder logic.
Whoever shows me the simplest way to program this, I will name my next son after them.
PS:
I am 50 years old and recently divorced from the third wife so, in all likelihood, you will be doing this exersize for the pure enjoyment of it, not any resulant legacy.
I can do this, BUT, when I look at the resulting ladder, and consider that a first year maintenance guy will have to troubleshoot it, I do not want to get called at three in the morning to explain ladder logic.
Whoever shows me the simplest way to program this, I will name my next son after them.
PS:
I am 50 years old and recently divorced from the third wife so, in all likelihood, you will be doing this exersize for the pure enjoyment of it, not any resulant legacy.