eastkodakguy
Member
The 1 vfd running several motors caught my attention. I have a question concerning this. Is it possible to use 1 vfd to control say 5 identical motors, only 1 motor at a time will be running, here is a rough schematic of what I am talking about
[VFD1]--------[contactor1]------[motor1]
[VFD1]--------[contactor2]------[motor2]
[VFD1]--------[contactor3]------[motor2]
Get the picture?
If this would work is it not good practices?
www.PowerhouseAutomation.com
[VFD1]--------[contactor1]------[motor1]
[VFD1]--------[contactor2]------[motor2]
[VFD1]--------[contactor3]------[motor2]
Get the picture?
If this would work is it not good practices?
www.PowerhouseAutomation.com
Last edited: