Hi,
I'm configuring the 1746-NI16I in a remote rack using RIO. My local rack consist of a 1747-L543 and 1747-SN (slot 1). My remote chassis consists of 1747-ASB and one 1746-NI16I (slot 1) & 1746-NI4 slot 2).
I've a current injector supplying 4-20 mA to the 1746-NI16I. The 1747-SN is configured into 1/4 rack.
Tried to set, but no luck. The 4 channel status is not on at all, only the module status on in green color. The link (rio) is fine as the comm (RIO) led is on green color.
Just to try my luck here if anyone kind enough to give a word or two to me, even better with a sample program. Thanks.
Regards,
CK Chew
I'm configuring the 1746-NI16I in a remote rack using RIO. My local rack consist of a 1747-L543 and 1747-SN (slot 1). My remote chassis consists of 1747-ASB and one 1746-NI16I (slot 1) & 1746-NI4 slot 2).
I've a current injector supplying 4-20 mA to the 1746-NI16I. The 1747-SN is configured into 1/4 rack.
Tried to set, but no luck. The 4 channel status is not on at all, only the module status on in green color. The link (rio) is fine as the comm (RIO) led is on green color.
Just to try my luck here if anyone kind enough to give a word or two to me, even better with a sample program. Thanks.
Regards,
CK Chew