irondesk40
Member
I have read the manual, but still confused, must be one of those days, hoping someone on here can help me see the light.
Have a slc505 that has a 1746-ni16i analog module in slot 6, in the first part of the program, there is a code that copyys the content of n13:0 to o:6.0 for a length of 16. N13:0 contains a value of 0.
Do not quite understand what putting a 0 in does as far as the configuration. Have used mostly the ab micro 1200 and 1100 and the analog is a little different with the slc.
Have a slc505 that has a 1746-ni16i analog module in slot 6, in the first part of the program, there is a code that copyys the content of n13:0 to o:6.0 for a length of 16. N13:0 contains a value of 0.
Do not quite understand what putting a 0 in does as far as the configuration. Have used mostly the ab micro 1200 and 1100 and the analog is a little different with the slc.