pompanowoes
Member
- Join Date
- Mar 2005
- Posts
- 3
Only using two axis, and each independant of the other.
Using hydraulic configurator, get movement. Using SLC 500 PLC logic, even though all register/bits look OK, no movement.
A/B wants bucks to help, and wonder what extent they'll go to?
Hope that someone that has used this module will provide what we hope is the one little thing that we are overlooking?
Thanks
Using hydraulic configurator, get movement. Using SLC 500 PLC logic, even though all register/bits look OK, no movement.
A/B wants bucks to help, and wonder what extent they'll go to?
Hope that someone that has used this module will provide what we hope is the one little thing that we are overlooking?
Thanks