Hi Guys
I have a Logix L81 CPU FW 32.011, and a 1756-DHRIO FW 7.003 in local rack. I am trying to talk to a Metler Toledo JagXtreme scales unit on CHA of the DHRIO using RIO. I have set up the RIO-ADAPTER module on CHA with the correct baudrate, rack address, start group and Racksize. Everything looks setup fine.
I am getting "Code 16#0108 Connection Request Error:Connection Type (Multicast/Unicast)not supported" error on the RIO-ADAPTER.
I have tried heaps of different things with no luck. The DHRIO Card looks happy. The DHRIO card is exact match to whats in my IO Config. Almost like the CPU is unhappy with the DHRIO card.
Also in the local rack is a EN2TR talking to point IO rack on its own local DLR network.
I have 2 separate PLCs trying to talk to their own Scales unit and are mis behaving the same.
There is an identical system setup beside it with a L61 CPU and is working fine.
Desperately need help on what to try next.
Thanks in advance I hope.
I have a Logix L81 CPU FW 32.011, and a 1756-DHRIO FW 7.003 in local rack. I am trying to talk to a Metler Toledo JagXtreme scales unit on CHA of the DHRIO using RIO. I have set up the RIO-ADAPTER module on CHA with the correct baudrate, rack address, start group and Racksize. Everything looks setup fine.
I am getting "Code 16#0108 Connection Request Error:Connection Type (Multicast/Unicast)not supported" error on the RIO-ADAPTER.
I have tried heaps of different things with no luck. The DHRIO Card looks happy. The DHRIO card is exact match to whats in my IO Config. Almost like the CPU is unhappy with the DHRIO card.
Also in the local rack is a EN2TR talking to point IO rack on its own local DLR network.
I have 2 separate PLCs trying to talk to their own Scales unit and are mis behaving the same.
There is an identical system setup beside it with a L61 CPU and is working fine.
Desperately need help on what to try next.
Thanks in advance I hope.