stallone
Member
Hi All,
I went to a customer yesterday and found the scanner on the rack (1769-SDN) to be faulty (solid red network led, error 91.
Checked all connections and cabling and decided to replace the scanner module.
As i plugged in the new scanner module the network light was flashing green and had the numbers 63 and 75 flashing on the module.
I opened rsnetworx for deviceNet and uploaded the old scanner config.scan list.
with the new scanner in, i tried to download the scanner list but just seem to be having problems.
I first battled forever trying to change the node address and sorted this out after finding the correct eds file.
I am using rsnetworx which says i do not have copy protection so it limits me to 6 nodes in demo mode.
Do you think this will prevent me from uploading/downloading the full node scanner list?
At the moment i go online fine in rsnetworx but it only uploads first 6 nodes and then just skips the rest.
im knew to this and learning as i go, please excuse the repetition
I went to a customer yesterday and found the scanner on the rack (1769-SDN) to be faulty (solid red network led, error 91.
Checked all connections and cabling and decided to replace the scanner module.
As i plugged in the new scanner module the network light was flashing green and had the numbers 63 and 75 flashing on the module.
I opened rsnetworx for deviceNet and uploaded the old scanner config.scan list.
with the new scanner in, i tried to download the scanner list but just seem to be having problems.
I first battled forever trying to change the node address and sorted this out after finding the correct eds file.
I am using rsnetworx which says i do not have copy protection so it limits me to 6 nodes in demo mode.
Do you think this will prevent me from uploading/downloading the full node scanner list?
At the moment i go online fine in rsnetworx but it only uploads first 6 nodes and then just skips the rest.
im knew to this and learning as i go, please excuse the repetition