BeepBob
Member
Does anyone know the part number for that plug that plugs into the 1771 devicenet scanner? The manual just says it is a linear plug, its 5 pins.
1771 DeviceNet Scanner linear plug
- Thread starter BeepBob
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
I don't know for sure who made the gray ones with the color code labels for A-B.
The equivalent Phoenix Contact connector with the same two rows, probe holes, and screw locking is part number TMSTBP 2,5/ 5-STF-5,08.
https://www.phoenixcontact.com/en-il/products/pcb-plug-tmstbp-25-5-stf-508-1853133
The equivalent Phoenix Contact connector with the same two rows, probe holes, and screw locking is part number TMSTBP 2,5/ 5-STF-5,08.
https://www.phoenixcontact.com/en-il/products/pcb-plug-tmstbp-25-5-stf-508-1853133
Similar Topics
Hello,
I am setting up for practice and I am having trouble seeing the 1771 Scanner in RsLinx as well as Rsnetworx
My setup:
slot 0 : PLC-5/40E...
Hello,
I am trying to create a network status map at a plant. I'm assuming the comm status bit of dnet nodes is in the BTR/BTW instruction that...
Searched the forums , but didn't see anything remotely similiar so here goes:
I've got a 2 node DeviceNet setup. One is the 1771-SDN on the PLC5...
Hello,
I have some experience with AB hardware and networks, but I need to add a Danfoss VLT5000 drive to an actual DeviceNet network, scanned...
Preface:
Kinda long, so I made section titles
Intro:
I just want to see if anyone here has seen anything similar. A PLC5-40 series C enhanced...