CaspianSage
Member
I just bought a 1771-IXE that I intend to use to monitor some temperatures with, mostly 120 degrees or less.
I have never set one of these up before. Are there any gotchas I need to be aware of. Going to put it in a PLC-5/20 chassis, 1st or second slot. All 120 I/O is in far right slots.
Is there a preferred thermocouple type? Can I use both J and K on the same module?
Thanks
I have never set one of these up before. Are there any gotchas I need to be aware of. Going to put it in a PLC-5/20 chassis, 1st or second slot. All 120 I/O is in far right slots.
Is there a preferred thermocouple type? Can I use both J and K on the same module?
Thanks
Last edited: