I have 1794-AENT Ser.A (brand new, no rotary switch as on Ser.B)on Controllogix 5000. I have istalled Bootp program from RSLogix5000 disk. My laptop has static IP 192.168.0.11, I need to setup an IP on 1794-AENT to 192.168.0.36
When Bootp starts MAC address from 1794-AENT shows up on the screen, double click on the MAC address and I have a window to setup IP, host name and description. So far so good. I put IP 192.168.0.36, subnet mask 255.255.255.0 host name "R1FlexIO" and same short description "R1FlexIO", click OK and ... Error in the Status Bar: Unable to Serve Boot IP address from MAC_Address_of_my_module
Ok, I made direct connection to module using cross cable. Same situation. Whet I try to disable Boot/Dhcp on the module I have a new error: Failed to complete requested operation. See Status bar for further information ...
What I do wrong?
Thanks.
When Bootp starts MAC address from 1794-AENT shows up on the screen, double click on the MAC address and I have a window to setup IP, host name and description. So far so good. I put IP 192.168.0.36, subnet mask 255.255.255.0 host name "R1FlexIO" and same short description "R1FlexIO", click OK and ... Error in the Status Bar: Unable to Serve Boot IP address from MAC_Address_of_my_module
Ok, I made direct connection to module using cross cable. Same situation. Whet I try to disable Boot/Dhcp on the module I have a new error: Failed to complete requested operation. See Status bar for further information ...
What I do wrong?
Thanks.