I'm communicating over modbus to a DO probe that will give me the PPM and Temperature, using a MVI56-MVM card in a controllogix rack. The problem is the first two registers are 2 16 bit INT's that need to be combined into a float in the Controllogix to be displayed on a screen. Anyone have any ideas to go about this.
The floating point number is a 32 bit IEEE-754 value that is occupying two 16 bit registers. Has one sign bit, eight exponent bits and 23 mantissa bits and is stored in motorala big-endian order. Thanks for anyones time.
The floating point number is a 32 bit IEEE-754 value that is occupying two 16 bit registers. Has one sign bit, eight exponent bits and 23 mantissa bits and is stored in motorala big-endian order. Thanks for anyones time.