Does anyone know why studio 5000 won't let me change the subnet mask or gateway for any of these drive in the "port configuration" tab for the module configuration in to IO tree for these powerflex 525 drives? It will allow me to change between DHCP/boot/static, but then it won't let me change the static IP (even though it looks like you can enter in numbers there, they won't)
https://imgur.com/nPSeezP
I can't find any information on the "port configuration" tab either. The power flex 25 Comm E2P manual skips over this screen.
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/520com-um003_-en-e.pdf
https://imgur.com/nPSeezP
I can't find any information on the "port configuration" tab either. The power flex 25 Comm E2P manual skips over this screen.
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/520com-um003_-en-e.pdf