kiwisoundguy
Member
Hi There,
I've had a wee look around for answer to this, but I can't find a suitible one, so I thought I'd ask you guys...
I would like some help finding cable suitible for 3 wire 4-20ma curcuit, with additional 18v dc +/- curcuit in the same cable ie 4 or 5 plus shield. The catch is that it needs to work over 100m and the cable will be run next (with in 6 inches) to HT mains (415v 3 phase) At on end there is also a magnet nearby. Will that cause any issues?
Will 4 x (7 x 0.2mm) twisted plus sheild be ok? Can the sheild be connected at both ends? If not I'll have to got to 5 + shield.
Thanks in advance.
Ben
I've had a wee look around for answer to this, but I can't find a suitible one, so I thought I'd ask you guys...
I would like some help finding cable suitible for 3 wire 4-20ma curcuit, with additional 18v dc +/- curcuit in the same cable ie 4 or 5 plus shield. The catch is that it needs to work over 100m and the cable will be run next (with in 6 inches) to HT mains (415v 3 phase) At on end there is also a magnet nearby. Will that cause any issues?
Will 4 x (7 x 0.2mm) twisted plus sheild be ok? Can the sheild be connected at both ends? If not I'll have to got to 5 + shield.
Thanks in advance.
Ben