Timeismoney08
Member
Does anyone know of a company who makes a io block where I could plug in 4 m8 plugs and if all of their signals are on, it turns on 1 signal going back to the PLC via m12?
In a sense, all you're doing is running 24v, 0v, and a signal wire. Then if all 4 inputs are made, they all pull in a relay which then forwards the 24V out of the signal wire. I can sketch this up pretty easy.
I've done this manually with Relays, but surely someone makes a stand alone block that does this..
Please help!
Thanks!
In a sense, all you're doing is running 24v, 0v, and a signal wire. Then if all 4 inputs are made, they all pull in a relay which then forwards the 24V out of the signal wire. I can sketch this up pretty easy.
I've done this manually with Relays, but surely someone makes a stand alone block that does this..
Please help!
Thanks!