BryanG
Member
Hi Zimmer
Archies Siemens driver is an Alpha version and I think that it only supports M memory at the moment. So to play you would have to add a rung to your PLC program so that Q0.0 switches say M0.0, then you should be able to see the changes on the HMI. Busy at work today but will try to add more info later.
Hopefully in two or three weeks I should have tacked a system called libnodave to the Advanced HMI and then you will have full access to the PLC. It depends on how quickly I run out of time or talent.
Archies Siemens driver is an Alpha version and I think that it only supports M memory at the moment. So to play you would have to add a rung to your PLC program so that Q0.0 switches say M0.0, then you should be able to see the changes on the HMI. Busy at work today but will try to add more info later.
Hopefully in two or three weeks I should have tacked a system called libnodave to the Advanced HMI and then you will have full access to the PLC. It depends on how quickly I run out of time or talent.