a question about suitable plc

aliej

Member
A
Join Date
May 2013
Location
tehran
Posts
1
Hi,

I need a PLC that operate as a MIMO PID controller.I design a project with simulink to control a system which is used PID controllers.

my plant has 3 sensors output that i change them to 7 inputs for my PID controllers with mathematics equations.of course i can use 7 another type of sensors for my PID controllers but i prefer to use less of themes.

i want to use a plc that operate like them. please help to select one of theme.

thanks alot
 

Similar Topics

O
Beginner question: PLC suitable for this project?
Hi, I don't know a lot about PLCs but need a controller capable of switching 6 outputs to a closed state for a variable specified time period...
2
Replies
20
Views
9,231
Ozone77
O
L
Question marks on every textbox of my aplication
I recently uploaded an aplication from a Panel View, created a new screen and now that I've downloaded it to the Panel View, all the texts have...
Replies
9
Views
152
LuisK_GB
L
P
Siemens 6ES7331-7KF02-OABO Wiring Question
I have never had the pleasure of working with a "Thermistor" until now and have a question. The Thermistor is a 10KOhm 4-20mA 2-wire device and I...
Replies
4
Views
134
parness45
P
P
JSR Execution Question
Hi All, So I have a main routine with an instruction that's executed by XIC "Run" I have a JSR located on a rung below it. In the logic for that...
Replies
6
Views
239
patrickmoneyy
P
O
AB 1769- L30 Input Card Question
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
103
joseph_e2
J
Back
Top Bottom