sabledanny
Member
Hi All,
Currently I have a PNP output device A connected towards an NPN input PLC.
Basically, there's 2 output terminals from device A called "Out1+" and "Out1-"
Just wanted to verify if my connection is correct below?
+24v supply (from PLC) ----> Out1+ (Device A)
Out1- (Device A) ----> PLC input 1
Looking forward to your replies.
Regards,
Danny
Currently I have a PNP output device A connected towards an NPN input PLC.
Basically, there's 2 output terminals from device A called "Out1+" and "Out1-"
Just wanted to verify if my connection is correct below?
+24v supply (from PLC) ----> Out1+ (Device A)
Out1- (Device A) ----> PLC input 1
Looking forward to your replies.
Regards,
Danny