Ab 1719 i/o

danny.michael

Lifetime Supporting Member
D
Join Date
Sep 2006
Location
Alabama
Posts
204
Does anyone have any hands-on experience with the 1719 I/O platform? I have a project to replace a customer's installation of 1797 I/O with the 1719 system. I know the differences between point counts, etc. What I am looking for is problems anyone has encountered with this I/O platform, or any advice in the implementation and operation. Thanks in advance.
 

Similar Topics

K
Rockwell 1719 A24 Extension Rack
Customer is adding an extension rack to an existing A22. They wired and powered it up, I configured the new cards in the PLC starting from slot 23...
Replies
4
Views
158
JeffKiper
JeffKiper
S
1719 AENTR
We had recently upgraded Rockwell control system from ControlNet to Ethernet (1719-AENTR). and in last couple of months 2 different AENTR devices...
Replies
3
Views
186
dummy_bit
dummy_bit
P
Faults on Rockwell 1719 IO modules
I have Rockwell 1719-AENTR/A IO modules that are working and all the IO is tested. However, channels are reporting faults even though the IO is...
Replies
9
Views
2,572
cardosocea
C
JeffKiper
1719 HART reset
I've never done any HART except look at the value. Does anyone know if you can do a reset of a flow meter over it?
Replies
3
Views
2,251
cardosocea
C
C
Rockwell 1719 IO
Anybody have any cost numbers on this - especially barriers built in versus not? And pros and cons of going with built-in barriers?
Replies
1
Views
1,505
Paullys50
P
Back
Top Bottom