AB and ABB: Running ABB IO with AB processors

xetrov123

Member
X
Join Date
Mar 2008
Location
Tacoma, WA
Posts
25
Does any one out there have experience integrating ABB 800xa IO with AB controllers? We have a large base of profibus ABB IO that would be connecting to several AB processors. I am curious how much manual entry would be required since we wouldn't be able to use ABB's engineering tools.

I'd appreciate any feedback!

Chris
 

Similar Topics

R
Abb ACS550 quick question on running %
Hey there, We have Multiple sewer lift stations using these drives. My boss would like to know what percent the pumps are set to run at...
Replies
7
Views
2,764
DickDV
D
K
ABB ACS600 running at Constant
I have an ACS 600 drive for motor control. The drive receives a 4-20mA input from a PLC at terminal AI2. The 4-20mA signal changes but the Motor...
Replies
2
Views
1,534
kobena
K
R
Unable to import capability file for FF device in ABB Freelance engineering tool
Recently we have purchased the Rosemount 752 remote indicator to replace with new one, Capability file for that FF Device is unable to import with...
Replies
0
Views
40
Rehanuldhanveer
R
EICS
ABB PS501 Control Builder Plus V2.3 Install - anyone use it or know of it
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
130
ojz0r
O
S
IE5 ABB motor and VFD
Hello, It is mandatory to use VFD IF i use IE5 electrical motor? What happens If connect it directly as delta without VFD? Please look at motor...
Replies
1
Views
178
kamenges
K
Back
Top Bottom