arefor32
Member
Hello all!
Typically, I use AB components but would like to find a low cost alternative. Any recommendations for a PLC with a small I/O count along with an operator interface?
Has anyone used an Automation Direct DO-05 with an Optimate 420 display? I am trying this combination for the first time and can not get it right. I don’t understand how to load a value into the accumulator or how the accumulator even works.
Can anyone offer some assistance or point me in the right direct?
Thanks in advance for your help!
Typically, I use AB components but would like to find a low cost alternative. Any recommendations for a PLC with a small I/O count along with an operator interface?
Has anyone used an Automation Direct DO-05 with an Optimate 420 display? I am trying this combination for the first time and can not get it right. I don’t understand how to load a value into the accumulator or how the accumulator even works.
Can anyone offer some assistance or point me in the right direct?
Thanks in advance for your help!