I have an AB PLC with an Ethernet Port (L32E). If I want to communicate with 3 drives and a SCADA,
1. How I can connect it?
2. Is it a workable solution if I connect 3 Drives and a SCADA to PLC through a Ethernet Switch with different protocol for SCADA and Drives?
Or, its workable solution only if PLC Communication to 3 Drives and SCADA is through the same PROTOCOL (eg:Modbus)?
3. Or we can't connect Drives and SCADA to the same network?
1. How I can connect it?
2. Is it a workable solution if I connect 3 Drives and a SCADA to PLC through a Ethernet Switch with different protocol for SCADA and Drives?
Or, its workable solution only if PLC Communication to 3 Drives and SCADA is through the same PROTOCOL (eg:Modbus)?
3. Or we can't connect Drives and SCADA to the same network?