Marc
Member
Here is my setup
2 1746-A4 4 Slot racks
2 1746-P1 power supplies
2 1747-L552 Processors
2 1747-BSN backup scanner modules
Looking at
1 1746-a13 13 slot rack
1 1747-ASB remote I/o adaptor
2 1746-ib16 input modules
4 1746-ow16 output modules
2 1746-NI8 modules
2 1746-NO8I modlues
2 open slots
In that order on the 13 slot chassis.
I have established the high speed serial link (BSN-BSN) and the remote i/o link between the BSN modules and the ASB module.
I have the discreet transfer working correctly configured as 4 full racks in my g-file configuration fro the BSN modules.
I have also gotten 1 channel of the analog output working via BTW instruction but I can't figure out how to address the other channels of the module or other modules in the chassis.
Anyone able to throw me a bone? This is the first time I've taken a whack at remote I/O and I'm not sure if I understand the addressing scheme.
Thanks in advance
Marc
2 1746-A4 4 Slot racks
2 1746-P1 power supplies
2 1747-L552 Processors
2 1747-BSN backup scanner modules
Looking at
1 1746-a13 13 slot rack
1 1747-ASB remote I/o adaptor
2 1746-ib16 input modules
4 1746-ow16 output modules
2 1746-NI8 modules
2 1746-NO8I modlues
2 open slots
In that order on the 13 slot chassis.
I have established the high speed serial link (BSN-BSN) and the remote i/o link between the BSN modules and the ASB module.
I have the discreet transfer working correctly configured as 4 full racks in my g-file configuration fro the BSN modules.
I have also gotten 1 channel of the analog output working via BTW instruction but I can't figure out how to address the other channels of the module or other modules in the chassis.
Anyone able to throw me a bone? This is the first time I've taken a whack at remote I/O and I'm not sure if I understand the addressing scheme.
Thanks in advance
Marc
Last edited: