LostInIKEA
Member
Hey PLC.net, I'm working with a PowerFlex 525. It's communicating within the panel via ethernet but I need to send the speed out 4-20mA via the analog output. I went into CCW and changed parameter 88 "Analog Out Sel" to "OutFreq 4-20" but when I meter the 14 and 16 (common and analog out), I get 0mA when the VFD is running.
Then I saw that there was a jumper J10 and it was at 0-10V so I changed it to the 0/4-20A one but still nothing
Any gurus out there that can help?
References I've used
http://www.marketotomasyon.com/UserFiles/File/Allen_Bradley/Drivers/PF523_525/520_qs001_en_e.pdf
pg14
https://rockwellautomation.custhelp.../~/powerflex-525-4-20ma-analog-out-sel-set-up
Then I saw that there was a jumper J10 and it was at 0-10V so I changed it to the 0/4-20A one but still nothing
Any gurus out there that can help?
References I've used
http://www.marketotomasyon.com/UserFiles/File/Allen_Bradley/Drivers/PF523_525/520_qs001_en_e.pdf
pg14
https://rockwellautomation.custhelp.../~/powerflex-525-4-20ma-analog-out-sel-set-up
Last edited: