Hi guys,
Started coding some blocks in Step 7 for Profibus comms to ABB ACS800 drive. Looks like typical Profibus DPV0 device, but...
I need to read Actual frequency, current, power and torque and display them on HMI - as usual scaling is needed between raw values from the drive and the final value.
Could you please advise what sort of parameters / factors need applying to scale raw values as the AB manual drives me bonkers?
We use FPBA-01 Profibus interface, so looks like we have to use ABB Drives communication profile. Correct me if I'm wrong as never used ABB drives and not familiar with terminology.
Thanks!
Started coding some blocks in Step 7 for Profibus comms to ABB ACS800 drive. Looks like typical Profibus DPV0 device, but...
I need to read Actual frequency, current, power and torque and display them on HMI - as usual scaling is needed between raw values from the drive and the final value.
Could you please advise what sort of parameters / factors need applying to scale raw values as the AB manual drives me bonkers?
We use FPBA-01 Profibus interface, so looks like we have to use ABB Drives communication profile. Correct me if I'm wrong as never used ABB drives and not familiar with terminology.
Thanks!