Anvilsoup
Member
I'm needing some help with a pair of ACS600's. I think the firmware manuals I've been able to find are too recent and my hardware appears to be canadian.
My 33.01 DTC SW version is CSA 3.0E
My 33.02 Appl SW version is A6ST_30G
My 33.03 test date is 0
My model # is ACS601-0006-5-000B1200800
What I'm hoping to do is set these bad boys up as a master follower pair. I have the fiber optic cables.
My first stumbling point (other than infamilarity with ABB) is that the firmware manuals (that I have accessed) have different terms and numbers and labels. In the standard application program 5.2 it appears that I want to use the T CTRL macro. But when I set the drive for T CTRL the 60.01 to 60.08 settings are not available. And it just gets worse from this point.
My 33.01 DTC SW version is CSA 3.0E
My 33.02 Appl SW version is A6ST_30G
My 33.03 test date is 0
My model # is ACS601-0006-5-000B1200800
What I'm hoping to do is set these bad boys up as a master follower pair. I have the fiber optic cables.
My first stumbling point (other than infamilarity with ABB) is that the firmware manuals (that I have accessed) have different terms and numbers and labels. In the standard application program 5.2 it appears that I want to use the T CTRL macro. But when I set the drive for T CTRL the 60.01 to 60.08 settings are not available. And it just gets worse from this point.