Hi,
I'm using ACS800 VFD for Hoist control application.
* Configured in Factory mode.
* When powered the VFD is ON; But receiving only the "Ready" status and VFD "Running" status is not received..,
Also, among three Relay outputs only any one is ON at a time...
How to run the VFD..? What r d important data to run..?
Even in Local mode, the vfd is not running; But, no warning is received.
Your suggestions Pls.
I'm using ACS800 VFD for Hoist control application.
* Configured in Factory mode.
* When powered the VFD is ON; But receiving only the "Ready" status and VFD "Running" status is not received..,
Also, among three Relay outputs only any one is ON at a time...
How to run the VFD..? What r d important data to run..?
Even in Local mode, the vfd is not running; But, no warning is received.
Your suggestions Pls.