chandrapaul
Member
Hi,I want to add a CPU that is not present in the library of TIA portal . Does someone can helpme ? i am using tia v14.
Add a CPU to the library tia portal
- Thread starter chandrapaul
- Start date
JRW
Member
What cpu?
Need details!
And firmware
Need details!
And firmware
What JRW asked and which version of TIA 14, I *think* the with the basic version yo have access only to S7-1200.
If your TIA supports the model you are wanting to add, you can install the HSP support packages. Or use the update tool.
Some of the newer CPU's are not supported by the older software. And as mentioned, some are restricted by what license you have.
Some of the newer CPU's are not supported by the older software. And as mentioned, some are restricted by what license you have.
Similar Topics
Hello
The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run?
I do not wanna...
Hi Guys.
I got a 1212C DC/DC/DC with 4 PWM outputs. I thought by adding an SB1222 atop of the CPU would give me more PWM outputs... but...
Hi all is their any way to add CPU 317-2DP into catalog of simatic5.1.
Thanks
I have ordered a new CPU for a new project. It is not covered in my Step7 (V5.3 SP1). I understand I can download an update for my hardware...
As the title says, all of the client HMIs at the plant freeze up for about 5-10 minutes everytime I or a vendor make new routines or new tags in...