Hi everyone,
I got assignment from my boss to develop AGV system using PLC programming. After surf by internet, I got info that i need to have :
1) Navigation
i) Wired method
ii)Guide Tape
iii)Laser target navigation
iv)Gyroscopic navigation
v)Natural Feature navigation
vi)Steering Control
2) Path Decision
i) Frequency select mode
ii)Path Select Mode
iii)Magnetic Tape Mode
3) Traffic Control
i) Zone Control
ii) Fwd Sensing Control
iii) Combination Control
4) Battery Charging
i) Battery Swap
ii)Automatic/Opportunity Charging
iii)Automatic Battery Swap.
Anyone from forum members ever develop or design this system using PLC? Can share with me?
Thank you in advance for the sharing.
Regards,
Zai_Jnr
I got assignment from my boss to develop AGV system using PLC programming. After surf by internet, I got info that i need to have :
1) Navigation
i) Wired method
ii)Guide Tape
iii)Laser target navigation
iv)Gyroscopic navigation
v)Natural Feature navigation
vi)Steering Control
2) Path Decision
i) Frequency select mode
ii)Path Select Mode
iii)Magnetic Tape Mode
3) Traffic Control
i) Zone Control
ii) Fwd Sensing Control
iii) Combination Control
4) Battery Charging
i) Battery Swap
ii)Automatic/Opportunity Charging
iii)Automatic Battery Swap.
Anyone from forum members ever develop or design this system using PLC? Can share with me?
Thank you in advance for the sharing.
Regards,
Zai_Jnr