Hello All,
Although I'm a newbie to posting on this forum I have used it many times in the past for help and advice - thanks to all you guys!
Anyway, my problem is that I have a customer that wishes me to connect to an Allen Bradley 1747-L30C PLC to help diagnose a problem that they are having with their production line.
Although I have used the SLC 500 (5/01 - 5/04) range in the past I have never connected to this type of processor.
Therefore I was wondering if RS Logix 500 and either the 1784-PCM4/B or PCM5/B lead would do the trick?
The customer has also mentioned that the code is backed up to an Eprom.
This is something that I have never done before but I assume that the latest version of the code could be written to the Eprom from RS Logix when connected to the PLC?
Thanks in advance for your help, Andrew
Although I'm a newbie to posting on this forum I have used it many times in the past for help and advice - thanks to all you guys!
Anyway, my problem is that I have a customer that wishes me to connect to an Allen Bradley 1747-L30C PLC to help diagnose a problem that they are having with their production line.
Although I have used the SLC 500 (5/01 - 5/04) range in the past I have never connected to this type of processor.
Therefore I was wondering if RS Logix 500 and either the 1784-PCM4/B or PCM5/B lead would do the trick?
The customer has also mentioned that the code is backed up to an Eprom.
This is something that I have never done before but I assume that the latest version of the code could be written to the Eprom from RS Logix when connected to the PLC?
Thanks in advance for your help, Andrew