Allen bradley GML ULTRA ,, please !!!!

[karacabrkk]

servo sürücüm var. kodu: 1398-pdm-030,
lütfen çok acil bir programa ihtiyacım var

 

[nightline]

servo sürücüm var. kodu: 1398-pdm-030,
lütfen çok acil bir programa ihtiyacım var

I can help you maybe, but please in English....

 

[karacabrkk]

i have a driver Allen bradley code: 1398-pdm-030. I need program urgently please .
Program name GML ULTRA.

 

[James Mcquade]

if you are referring to the ultra drive software, it's not free and requires a serial number to activate. if I am wrong, someone please correct me.

james

 

[nehpets]

The Ultra 100 series are well obsolete the software to program them is "ULTRAMST". I'm pretty sure that Version 1.60 is available on AB's website and is (suprisingly) free, I'm not sure where it is you may have to trawl the website, version 1.62 (the last version) is also available (or was) but for some reason that is not free.


Steve


https://compatibility.rockwellautom...umb=112&refSoft=1&toggleState=&versions=50415

 

[BachPhi]

http://www.plctalk.net/qanda/showthread.php?t=113327&highlight=ultra

 

[Geospark]

The Ultra 100 series are well obsolete the software to program them is "ULTRAMST". I'm pretty sure that Version 1.60 is available on AB's website and is (suprisingly) free, I'm not sure where it is you may have to trawl the website, version 1.62 (the last version) is also available (or was) but for some reason that is not free.

UltraMaster v1.60 is available for download via the Product Compatibility and Download Center (PCDC), but it is not free, as such. You must have a valid serial number from either a previous purchase or a related TechConnect Contract, such as for Legacy Hardware.

The same goes for v1.62...

51191 - UltraMaster Software Download
Access Level: TechConnect

However, you cannot download UltraMaster v1.62 from the PCDC, only v1.60. Once you have proven yourself qualified though, Rockwell will instruct you as to how you would download v1.62, if you did want to use this newer version instead.

Regards,
George