geniusintraining
Lifetime Supporting Member + Moderator
So being tired of turning on the old win98 laptop and running it to run PCIS software, I was able to get it to run on XP and communicate using DOSBOX also I would think that you could run it and configure it on Win2K but not sure.
Its a free software that you can run a dos program as a virtual machine, its similar to VM Ware or Virtual PC, but its easy, free and works
Just thought I would pass it on, just incase someone had to go back in time and program a SLC 150 or 100
HERE is a post that rsdoran made with the manual and operating software for free...
I also have a real serial port on this PC, not sure if it would work on others ports.
Its a free software that you can run a dos program as a virtual machine, its similar to VM Ware or Virtual PC, but its easy, free and works
Just thought I would pass it on, just incase someone had to go back in time and program a SLC 150 or 100
HERE is a post that rsdoran made with the manual and operating software for free...
I also have a real serial port on this PC, not sure if it would work on others ports.