Hi
I will using analog input of 1-5V from a pressure switch for monitoring purpose. I am using MITSUBISHI FX2N-2AD module for this purpose. But it is written on the manual the availabe denomination for analog input for this modelu are 0-10Vdc, 4-20mA & 0-5 V. (please see attachment)
Am I getting it right? There is written about offset & gain adjustment (but not programmble but rather physical)but i just can't seem to get.
"It is necessary to readjust the offset & gain value when FX2N-2AD is used in current input, 0-5Vdc or with an input characteristic the factory setting". What readjustment does it mean?
I will using analog input of 1-5V from a pressure switch for monitoring purpose. I am using MITSUBISHI FX2N-2AD module for this purpose. But it is written on the manual the availabe denomination for analog input for this modelu are 0-10Vdc, 4-20mA & 0-5 V. (please see attachment)
Am I getting it right? There is written about offset & gain adjustment (but not programmble but rather physical)but i just can't seem to get.
"It is necessary to readjust the offset & gain value when FX2N-2AD is used in current input, 0-5Vdc or with an input characteristic the factory setting". What readjustment does it mean?