Picojoe
Member
In our FactoryTalk View ME HMI panel (PanelView Plus 7), we would like to use the built-in tags for our 1734-IE8 analog input modules. These tags include engineering unit ranges, alarm limits, alarm output bits, faults, etc. To set the values of the configuration tags, we go to the module properties in RSLogix/Studio 5000 and access the Alarm Configuration tab. This works fine, as long as you never have to change any of the configuration values. We need to be able to change the ranges and limits from the HMI. The HMI can link to the tags, but the values do not change in the configuration. We have to go to the configuration in RSLogix and hit "Apply" for any changes to take effect. Is
there a way to "Apply" from the HMI?
there a way to "Apply" from the HMI?