Hello all,
Can I use my two onboard analog inputs as digital inputs without having to use a voltage divider circuit to drop my 24vdc to 10vdc. The specs manual is not very clear about the maximum voltage I can place at my analog input terminals, it states "voltage input over voltage protection - 10.5VDC" The client requires an upgrade of 2 x DI but there is not enough room in the cabinet. thanks!
Can I use my two onboard analog inputs as digital inputs without having to use a voltage divider circuit to drop my 24vdc to 10vdc. The specs manual is not very clear about the maximum voltage I can place at my analog input terminals, it states "voltage input over voltage protection - 10.5VDC" The client requires an upgrade of 2 x DI but there is not enough room in the cabinet. thanks!