I have a Click PLC and I want to take my thermocouple input and convert it to a 4 to 20 ma output. Where can I find an example or tutorial on how to get this done? I have the digital aspects of the PLC down pat but these analogs are kicking my but.
Analog input scaled then shoved to an Output
- Thread starter mvlawn
- Start date
https://forum.automationdirect.com/showthread.php?t=6815
The above link should help you out. After setting up the analog in and out with scaling factors to the registers, you can just use a copy instruction.
Regards,
The above link should help you out. After setting up the analog in and out with scaling factors to the registers, you can just use a copy instruction.
Regards,
Similar Topics
Hello - you folks were kind in helping me the other day so I'm back for more...
My program is finished however the end customer hasn't provided...
I'm having trouble calming down 2 Tempo Sonics. I'm using Studio 5000 CompactLogix my Raw value is jumping around from 8575.0 to 8755.0 at a...
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Hi, I have questions. I have Analog Input that need to put into Ignition Designer. But I don't know how to put?
Omron AD081-V1 Analog Input Card
Offset & Gain Adjustment
Entering Adjustment Mode
1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...