BoSChoW
Member
Hi all,
I use CPU313C which i program in Siemens SIMATIC Step7 and OP7. I have connected the measure probe "tool" to the analog input 1, i made a variable table to see the changes of analog values but insted of a scale i recieve just 10 and 0. In the HW confing i have configured that AI1 is a voltage type and the voltage scale from 0..10V. I dont know if i did something wrong, or i have forgot to do something. If anyone knows how to solve my problem pls respond. Thanks for yout time and help.
Regards BoSCHoW.
I use CPU313C which i program in Siemens SIMATIC Step7 and OP7. I have connected the measure probe "tool" to the analog input 1, i made a variable table to see the changes of analog values but insted of a scale i recieve just 10 and 0. In the HW confing i have configured that AI1 is a voltage type and the voltage scale from 0..10V. I dont know if i did something wrong, or i have forgot to do something. If anyone knows how to solve my problem pls respond. Thanks for yout time and help.
Regards BoSCHoW.