TimeFluxCap
Member
Hi all
Can someone please point me in the right direction in how to do this problem with a ControlLogix?
I have a TPS transmitter that reads four different readings. I want to pull the info of each instrument out via ASCII.
The TPS people say if you send a ?C<cr> command to the TPS is will return the data in the following format
oxygen,conductivity,ph,orp,temp<cr>
I am new to ASCII comms. The example programs show how to read a continous ascii string or write characters but not how to send a request command and read it.
Thanks
TFC
Can someone please point me in the right direction in how to do this problem with a ControlLogix?
I have a TPS transmitter that reads four different readings. I want to pull the info of each instrument out via ASCII.
The TPS people say if you send a ?C<cr> command to the TPS is will return the data in the following format
oxygen,conductivity,ph,orp,temp<cr>
I am new to ASCII comms. The example programs show how to read a continous ascii string or write characters but not how to send a request command and read it.
Thanks
TFC