gareth.cantrill
Member
- Join Date
- Oct 2004
- Posts
- 51
Hello,
I have a simple question for those of you who are more familiar than myself with ControlLogix.
I have purchased an AB 1756-ENBT/A EtherNET/IP card. Now obviously the card does not currently have an IP address assigned to it, only a MAC address.
Now I have been led to believe that I should use the BootP program to give the card an IP, however having tried this I have found that the BootP program acts as some sort of server which needs to be permanently connected. If it is not then the card loses its IP when power is removed from it.
Can anyone provide me with the instructions to manually enter the IP address on the card?
Thanks
I have a simple question for those of you who are more familiar than myself with ControlLogix.
I have purchased an AB 1756-ENBT/A EtherNET/IP card. Now obviously the card does not currently have an IP address assigned to it, only a MAC address.
Now I have been led to believe that I should use the BootP program to give the card an IP, however having tried this I have found that the BootP program acts as some sort of server which needs to be permanently connected. If it is not then the card loses its IP when power is removed from it.
Can anyone provide me with the instructions to manually enter the IP address on the card?
Thanks