Have a job that the ATC unit has failed on. The replacement is an Omron ZEN with ladder programming. The ATC format was and gates and delay timers and reset timers.
Can't get timers to work on omron
Can't get internal relay to propogate thru ladder. ie mo is high on the simulator at a rung on the output but when used as an input on next line it is not high
I have a jpg of the simulatr but not sure how to attach to thread
thanks
Can't get timers to work on omron
Can't get internal relay to propogate thru ladder. ie mo is high on the simulator at a rung on the output but when used as an input on next line it is not high
I have a jpg of the simulatr but not sure how to attach to thread
thanks